Features

• Ez-Bind™ Feature - Easily create a remote control connection. Prior to welding, hold the gun trigger for 5 seconds to establish a connection between the feeder and power supply via the weld cable. - Connect the SuitCase VS WCC to any WCC equipped power source for remote voltage control. Feeders and power supplies can be mixed and matched. - Guarantees remote control operation with multiple power sources connected to the same work piece.
• Improved contactor for high-amperage, high duty cycle applications.
• Propylene case with built-in side rails and the ability to open the door to change wire with the feeder in a vertical position.
• Potted and trayed main printed circuit board for the harshest environments add exceptional reliability. Motor control board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
• Digital meters with SunVision™ technology are standard for voltage and wire spped, and can also display amperage if desired. Meters can be seen clearly even in direct sunlight.
• Wider voltage range for small and large wires with no contactor chatter or arc outages.
• Double-filtered gas falve helps kepe dirt from clogging and affecting gas flow.
• Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply. Best low-end CC arc in the industry.
• WCC Control communication - digital messages are passed between the WCC Control and feeder via the weld cable. WCC COntrol responds to the messages and sets te power source voltage command in the 14-pin connector.
• Easy installation - weld cable with connectors is provided for easy power source connection. Connect the 14-pin connector to the power source.
• Thermal overload protection protects internal components from damage and automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
• Wind Tunnel Technology™ - Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
• Lift-Arc™ start provides TIG arc starting without the use of high frequency.
• Adaptive Hot Start™ automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
• Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
• Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
• Inverter Arc Control Technology provides greater puddle control for superior 6010 electrode performance.